Product Search
Search results for 'D-2937'
Showing 41 - 61 of 563 Total Results
(2) options
Location: Parts & Accessories
Test Mark hand augers feature heavy-gauge heat treated steel, zinc plated for rust resistance. Order online securely.
(2) options
Location: Compaction Hammers
Soil Compaction Hammers from Test Mark are machined from steel and plated for rust resistance. Easy online ordering.
CA-1570
Location: Field Rocker Screen Set
The field rocker screen set from Test Mark Industries consists of a 12-inch square steel frame with interchangeable wire cloth and bottom pan.
SA-1302
Location: Probe Rod
For protection against possible electrical shock when working around buried electrical lines. T-handle has high density nylon cover. Shaft is 1/2" dia. x 48" long, steel tip measures 5/8" x 3/4". NOTE : Because size and weight will vary with quantities ordered, we have reserved the freight charges...
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
Perpendicular Verification Device
(3) options
Location: Perpendicular Verification Device
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
TS17 Touchscreen Load Indicating System
TS17
Location: Digital Load Indicating Systems
Test Mark is proud to introduce the TS17 touchscreen digital load indicating system for concrete compression testing machines. The controller’s 7'' full color waterproof screen uses large, easy-to-read, alphanumeric characters to simultaneously display live load, sample stress, and rate of loading...
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
CA-0500
Location: Air Entrainment/Pressure Meter
The air entrainment concrete pressure meter from Test Mark is part of a complete line of concrete testing equipment, available for easy online ordering.
SA-0662
Location: Hydrometer Jar
Hydrometer jars are used to suspend soil hydrometers in sodium hexametaphosphate solution for determining the amount of soil particles in a dispersed suspension.
Aqua-Check Kit, 20 gram capacity
SA-0255
Location: Moisture Testing
The Aqua-Check from Test Mark is a portable system used for measuring the moisture content of a wide range of materials including sand, aggregates and soil.
(3) options
Location: Beam Testers
Self-contained shock-proof portable concrete beam tester accurately and easily determines flexural strengths of 6 x 6 in. cross-section beams - from Test Mark.
CA-3132
Location: Cement
Glass plate for use with all Vicat Apparatus is 4" x 4" x 3/16" (101.6 mm x 101.6 mm x 4.8 mm).
4" Lightweight Retainer Rings (2)
CA-0200-L
Location: Unbonded Capping (Retainers and Pad Caps)
Aluminum retainer rings are 35% lighter than steel caps to reduce fatigue. They are heat-treated and hard anodized for longer wear and durability and conform to ASTM C-1231 specifications.
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
(2) options
Location: Sample Bags
Plastic-lined sample bags from Test Mark are used to transport soils, cement, aggregate, and wet materials from the field to the laboratory.
Blaine Air Permeability Apparatus
CA-2970
Location: Blaine Air Permeability
The Blaine Air Permeability Apparatus from Test Mark determines the fineness of Portland cement on terms of specific surface expressed as total surface area in square centimeters per gram of cement.
SA-1500
Location: Static Cone Penetrometer
Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.
(5) options
Location: Unit Weight Buckets
Aluminum cylindrical unit weight measures from Test Mark have machined interior surfaces, carrying handles, true and even top and bottom surfaces, are water-tight and will retain form after repeated use.
